LFY-259B Protective clothing splash spray liquid tightness tester
It is mainly used to test the spray liquid tightness and spray liquid tightness of protective clothing.
The main purpose
It is mainly used to test the spray liquid tightness and spray liquid tightness of protective clothing.
Technical index
1. Rotation speed of turntable: 1rpm;
2. Installation distance of spray nozzles: 450mm;
3. The distance between the center of the spray rod and the center of the turntable: 1500mm;
4. Spray angle of spray nozzle: 75°;
5. Splashing pressure: 300kPa;
6. Splashing speed: (1.14±0.1) L/min;
7. Jet nozzle;
Nozzle diameter (4±1) mm
Length of nozzle opening (4±1) mm
Inner diameter of nozzle tube (12.5±1) mm
8. The distance between the jet pressure gauge and the nozzle opening is (80±1) mm;
9. The liquid pressure at the jet pressure gauge is 150kPa.
Applicable standards
GB 24540-2009 "Protective clothing, acid-base chemical protective clothing" Appendix I Splashing liquid tightness test method, Appendix J Spraying liquid tightness test method
ISO 17491-3-2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
ISO 17491-4-2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
The mannequin is 1.85 meters
It is mainly used to test the spray liquid tightness and spray liquid tightness of protective clothing.
Technical index
1. Rotation speed of turntable: 1rpm;
2. Installation distance of spray nozzles: 450mm;
3. The distance between the center of the spray rod and the center of the turntable: 1500mm;
4. Spray angle of spray nozzle: 75°;
5. Splashing pressure: 300kPa;
6. Splashing speed: (1.14±0.1) L/min;
7. Jet nozzle;
Nozzle diameter (4±1) mm
Length of nozzle opening (4±1) mm
Inner diameter of nozzle tube (12.5±1) mm
8. The distance between the jet pressure gauge and the nozzle opening is (80±1) mm;
9. The liquid pressure at the jet pressure gauge is 150kPa.
Applicable standards
GB 24540-2009 "Protective clothing, acid-base chemical protective clothing" Appendix I Splashing liquid tightness test method, Appendix J Spraying liquid tightness test method
ISO 17491-3-2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
ISO 17491-4-2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
The mannequin is 1.85 meters