LFY-817A Sheet Friction Coefficient Tester
The main purpose
The sheet friction coefficient tester accurately measures the static and dynamic friction coefficients between the sheet and the friction medium in the dry, water, and oil state, and displays the curve of the friction force over time in real time.
Instrument characteristics
1. The system can simultaneously measure the static friction coefficient and the dynamic friction coefficient of the sample.
2. Computer control, automatic display of test data, results, and curves.
3. Man-machine dialogue interface, Windows operating system.
4. There is no vibration in the driving mechanism, and the two test surfaces move relatively at a speed of (150±30) mm/min.
5. The total error of the entire force measurement system is less than ±2%, and its transformation time T does not exceed 0.5s.
6. The force direction of the drive mechanism is parallel to the friction sliding direction.
Technical index
1. Slider moving speed: (150±30) mm/min
2. Load range: 0~5N, accuracy 1%
3. Friction stroke: 130mm
4. Slider: 40cm2 square on the bottom surface, mass (200±5) g
5. Sample: 25cm×13cm
6. Human-machine dialogue
7. Power supply form: AC 220V, 50Hz
Applicable standards
ASTM D 1894-14 Standard test method for static and kinetic coefficients of plastic film and sheeting
The sheet friction coefficient tester accurately measures the static and dynamic friction coefficients between the sheet and the friction medium in the dry, water, and oil state, and displays the curve of the friction force over time in real time.
Instrument characteristics
1. The system can simultaneously measure the static friction coefficient and the dynamic friction coefficient of the sample.
2. Computer control, automatic display of test data, results, and curves.
3. Man-machine dialogue interface, Windows operating system.
4. There is no vibration in the driving mechanism, and the two test surfaces move relatively at a speed of (150±30) mm/min.
5. The total error of the entire force measurement system is less than ±2%, and its transformation time T does not exceed 0.5s.
6. The force direction of the drive mechanism is parallel to the friction sliding direction.
Technical index
1. Slider moving speed: (150±30) mm/min
2. Load range: 0~5N, accuracy 1%
3. Friction stroke: 130mm
4. Slider: 40cm2 square on the bottom surface, mass (200±5) g
5. Sample: 25cm×13cm
6. Human-machine dialogue
7. Power supply form: AC 220V, 50Hz
Applicable standards
ASTM D 1894-14 Standard test method for static and kinetic coefficients of plastic film and sheeting