LFY-299 Non-leakage performance tester for protective gloves
The main purpose
LFY-299 non-leakage performance tester for protective gloves is used to measure the non-leakage performance of labor protective gloves. Gloves that are widely used in industry and agriculture can also be used for related tests and inspections conducted by the national labor protection equipment inspection agency.
Instrument characteristics
1. The instrument consists of an air source, an air path that can adjust pressure, a special fixed sample holder for gloves, a water tank, and a measurement system.
2. A special device seals the gloves with the test gas path, and the manipulator automatically immerses the installed gloves into the water tank.
3. The precision pressure gauge displays the air pressure value.
4. Digital display timer, buzzer alarm when time is up. .
Technical index
1. The air compressor is used as the air source to supply air to the instrument without being restricted by the space of the test site;
2. Equipped with a high-precision pressure gauge to display the air pressure value with an accuracy of ±1kPa;
3. Timing range: 0-99.99s, accuracy: ±0.01s;
4. The special sample holder ensures a good seal between the gloves and the gas path.
5. Power supply: AC220V, 50Hz
Applicable standards
GB 12624-1990 General technical conditions for labor protection gloves, Article 6.7 Determination of non-leakage performance of gloves
EN 374-2
LFY-299 non-leakage performance tester for protective gloves is used to measure the non-leakage performance of labor protective gloves. Gloves that are widely used in industry and agriculture can also be used for related tests and inspections conducted by the national labor protection equipment inspection agency.
Instrument characteristics
1. The instrument consists of an air source, an air path that can adjust pressure, a special fixed sample holder for gloves, a water tank, and a measurement system.
2. A special device seals the gloves with the test gas path, and the manipulator automatically immerses the installed gloves into the water tank.
3. The precision pressure gauge displays the air pressure value.
4. Digital display timer, buzzer alarm when time is up. .
Technical index
1. The air compressor is used as the air source to supply air to the instrument without being restricted by the space of the test site;
2. Equipped with a high-precision pressure gauge to display the air pressure value with an accuracy of ±1kPa;
3. Timing range: 0-99.99s, accuracy: ±0.01s;
4. The special sample holder ensures a good seal between the gloves and the gas path.
5. Power supply: AC220V, 50Hz
Applicable standards
GB 12624-1990 General technical conditions for labor protection gloves, Article 6.7 Determination of non-leakage performance of gloves
EN 374-2